Spectrum Analyzer SPECTRAN HF-6060

Kr  11 625

Estimert leveringstid er 3-10 dager (forhåndsbestilling)

Bli den første som omtaler dette produktet

Oversikt

Spectrum Analyzer SPECTRAN HF-6060 V4

RF Analyzer entrance unit of the latest V4 generation. Offers an up to 100x faster sample time, a much higher sensitivity, smaller filter (RBW) and lots of new additional features compared to the portable V3 spectrum analyzers.

Our latest V4 generation offers a vastly enhanced feature set with significantly faster sample time, more dynamic range, better IP3, reduced phase noise, greater demodulation bandwidth and improved LCD display compared to the previous V3 series. Our V4 flagship HF-60100 V4 is even suitable for Pre-Compliance and EMC/EMI tests.

Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software.

Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all SPECTRAN spectrum analyzers and EMC antennas.

Real-time remote spectrum analyzer software (included for FREE):
All SPECTRAN units offer a USB interface with real-time remote control to your PC or MAC. The free analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN into a powerful measurement solution with great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.). Please have a look at the latest version of our software at our software development website.

Limits display:
All SPECTRAN units offer a powerful limits display. Just push the limits button at our Spectrum Analyzer and the high-performance Digital Signal Processor (DSP) of the SPECTRAN constantly calculates the limits and displays the results in real-time. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this cost by using Aaronia analyzers.

EMC antenna included:
The shipment of each SPECTRAN already includes a free EMC directional antenna which covers a wide frequency range. In addition Aaronia provides a lot of optional antennas especially for pre compliance and EMC/EMI tests. Those offer a much higher frequency range and more gain (especially in the frequency range below 700MHz). More details about our antennas can be found at Aaronia antenna

Options:
All SPECTRAN units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".

Included in delivery:
Each SPECTRAN will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".

As well as being lower cost, the SPECTRAN RF units are much smaller, lower power and lighter than other RF spectrum analysers currently available. The low power consumption offers up to 9 hours of continuous operation from a charge which truly is a new record on portable analyzers.
The SPECTRANs offer RF service engineers a highly portable and cost effective tool that enables to carry a spectrum analyser to areas that have usually been not cost effective when using existing "portable" products and difficult or even impossible to access with bench top instruments offered by other manufacturers. Our low cost and ultra portable spectrum analysers ensure that site survey and RF testing can be performed on any site visit.
The SPECTRAN V3 series weighs less than 420gr and measures only 250 x 86 x 27 mm. The low weight and small dimensions make it a true handheld instrument, unlike other "portable" spectrum analysers which can be up to ten times of the size and weight.

Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software.

Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all SPECTRAN spectrum analyzers and EMC antennas.

Real-time Spectrum analyzer software (included for FREE):
All SPECTRAN units offer a USB interface with real-time remote control to your PC or MAC. The free analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN into a powerful measurement solution with great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.). Please have a look at the latest version of our software at our software development website.

Limits display:
All SPECTRAN units offer a powerful limits display. Just push the limits button at our Spectrum Analyzer and the high-performance Digital Signal Processor (DSP) of the SPECTRAN constantly calculates the limits and displays the results in real-time. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this costs by using Aaronia analyzers.

EMC antenna included:
The shipment of each SPECTRAN includes a free EMC directional antenna which covers a wide frequency range.

Options:
All SPECTRAN units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".

Included in delivery:
Each SPECTRAN will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".

 

Detaljer

Technical data

  • RF frequency range: 10MHz to 6GHz
  • DANL: -135dBm(1Hz)
  • DANL with Preamp: -150dBm(1Hz)
  • Max. power at RF input: +10dBm
  • Lowest sample time: 10mS
  • Resolution (RBW): 3kHz to 50MHz
  • Units: dBm, dBµV, V/m, A/m, W/m²
  • (dBµV/m, W/cm² etc. via PC software)
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM
  • Input: 50 Ohm SMA RF-input (f)
  • Accuracy: +/- 2dB (typ.)
  • Interface: USB 2.0/1.1
  • Dimensions (L/W/D): 250x86x27 mm
  • Weight: 430gr
  • Warranty: 10 years

Highlights:

  • RF exposure limit calculation and display according to DIN/VDE 0848
  • Up to 100x faster sample time than V3 units
  • Up to 60dB higher sensitivity than V3 units
  • Low noise preamplifier (option)
  • 14Bit Dual-ADC
  • DDC Hardware-Filter
  • 150 MIPS DSP (CPU)
  • Data Logger (64K), expandable to 1MB (Option 001)
  • Enhanced and much sharper LCD display (compared to V3 units)
  • Simultaneously displays frequency and signal strength
  • Real-time remote control via USB
  • Large, high resolution multifunction LCD
  • Vector (I/Q) measurement
  • DECT & TimeSlot analyzer
  • Real-time RF Peak Power Detector (option)
  • Hold function
  • Included EMC directional antenna HyperLOG 7060
  • Free MAC OS, Linux and Windows analyzersoftware

Included in delivery

  • Portable RF Spectrum Analyzer HF-6060 V4
  • HyperLOG 7060 EMC measurement antenna
  • Pistol grip with mini tripod function
  • 1m SMA cable
  • SMA adapter (m/m)
  • SMA tool
  • SPECTRAN 1300mAh rechargeable battery (integrated)
  • Battery charger and power supply incl. international adapter set
  • Large aluminum carrying case with foam protection
  • Detailed English manual (on CD)
  • Analyzer software for MAC OS, Linux and Windows (on CD)

Examples for possible analysis and measurements within frequency range (10MHz - 6GHz):

  • Radio & TV
  • Tetra/BOS
  • ISM434
  • LTE800
  • ISM868
  • GSM900
  • GSM1800
  • GSM1900
  • DECT
  • UMTS
  • WLAN
  • Microwave
  • Bluetooth
  • WiFi
  • LTE2.6
  • WiMAX
  • Directional Radio
  • 5GHz WLAN
  • etc.

 

Option 001 (1MB Memory Expansion)

This memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10 000 logs, while the standard memory will only last for approximately 100 of them.
Standard memory size is 64K.


Option 020 (15dB Low Noise Internal Preamplifier)
This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price. The maximum sensitivity of the V4 series without option 020 is lower by 15dB.

Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)
These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.

Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1MHz-10GHz)
These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.


Option 203 (6GHz Broadband Peak Power Meter)
This option expands your SPECTRAN with a Peak Power Meter with full 6GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also a perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm.

Option 015 - Bug Sniffer (Audio Signal Tracker)
The Option 015 provides an acoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal sources. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20 X). As a highlight, the dynamic can be adapted optimally by moving the reference level.

 

 

Spectrum Analysator Software Icon Get Spectrum Analyzer Software!

 

Frequency Charts

 

 Manual

 

Video on Aaronia analyzers (be aware of difference in models)

 

 

Skriv din egen omtale

Only registered users can write reviews. Please, log in or register

Produkttagger

Bruk mellomrom for å skille tagger. Omgi setninger med apostrof (').

Tilleggsinfo

ProdusentIkke tilgjengelig
MomsklasseMomspliktige varer 25%

Dette er en erstatning for salgsproduktene